I posted these photos a build I just completed… let me know if you have any questions. Note: this is on a DUO board but the process should be the same.
yes, I am running a DUO that will allow 2 taps…
I am running 2 SF-800 flow meters but I reccomend against them as they are BSP fitting and i have had a hell of a time getting fittings to match. I was able to get some cast brass ones but now I have way too much foam. I suspect it is because the brass is rough.
I also removes the stock connectors from the meters and soldered on new ones that fit what I had.
here are some pictures of what I did:
[IMG_20170913_203234] [IMG_20170913_205106] [IMG…