Finally got around to completing a tablet enclosure and a way to hide all the guts of my TF101 charging board and the KBPM project box that I starting this thread for.
I had some scrap 1/2" plywood laying around and used that for the box. Used some scrap 2x4s to make the French cleat system for attaching it to the wall which makes it easy to remove.
Added some scrap moulding and black paint because it just seemed to be the best color for the job. The tap handles are secured from below with carriage bolts.
The tablet is held in place with a couple plastic fasteners at the top corners that swing out of the way to remove the tablet if I so choose. The KBPM is proudly displayed to the right of the tablet inside the aforementioned project box. There’s an additional project box velcro’ed inside the shelf box which holds the charging board that I removed from the TF101 keyboard docking station so that I could get tablet charging while maintaining OTG capability.
The tablet utilizes the 40 pin dock connector that I also removed from the TF101 keyboard docking station and built it into the tablet pocket within the shelf box.
Yup, tablet charging and OTG! Success!
