FT330 Calibration

Build Help
#1

kegbot-server seems to be configured with defaults for the Swiss Flow SF800 sensor in the Calibration section. Now that the FT330 is the default, kegbot-server should be configured with calibration based on that sensor.

I don’t have a graduated cylinder handy to calibrate. Can anyone offer up a good baseline to start with? If so, I’ll submit a PR over on github to change the default value.

#2

Thanks for noticing this! Turns out the change has been in my local git client and not pushed, doh.

FT330 is 2.724 ticks/mL according to its datasheet, so you can use that as a decent starting value.

#3

I have mine set at 2.5 and it’s pretty accurate.